NexStar Resource Site

line.gif (861 bytes)
Pop-Up Info Window
(close when finished)
line.gif (861 bytes)

Using NexRemote on the CGE, CGE Pro and CGEM with Hand Control Versions 4.13 and 4.15

In order to use NexRemote on the CGE, CGE Pro and CGEM when connected via the RS-232 port on the bottom of the hand control, if the hand control is programmed with firmware version 4.13 or 4.15, you will need to turn the RTC OFF in the hand control menu.  The symptom experienced is an inability to enter a valid date and time. 

To turn off the RTC, power up the scope, press the Menu button, select Utilities, and then Turn On/Off RTC.


line.gif (861 bytes)

line.gif (861 bytes)
Copyright
Michael Swanson
 
  Contact the webmaster:
swanson.michael@usa.net